Comparative Performance Characteristics of the Various Different Types of Die Casting Machines

Kommentare · 462 Ansichten

An In-Depth Analysis and Assessment of the Factors Influencing the Efficiency of the Die Casting Machine This is due to the fact that the function of the clamping force is to prevent the parting surface of the die casting mold from separating when it is subjected to the action of the expan

An In-Depth Analysis and Assessment of the Factors Influencing the Efficiency of the Die Casting Machine

This is due to the fact that the function of the clamping force is to prevent the parting surface of the die casting mold from separating when it is subjected to the action of the expanding force during the injection process. This is an index that discusses the precautions that are taken before, during, and after the production of die castings in order to ensure worker safety. When choosing the die casting machine, the possible release force should be calculated by taking into account the projected area of the workpiece in addition to the injection specific pressure that is required for the production of the workpiece. The die casting that was chosen must have a nominal clamping force that is higher than the release force in order to meet the requirements.

Size of the mold space
This is the case when the mold is being used. As a consequence of this, the stress condition of the formwork that is being moved and set will be improved as a result of this. As a direct consequence of this, both the machine and the mold will enjoy an extended service life as a consequence.

 
 

 

It is possible to calculate the injection force by using the cylinder diameter of the injection cylinder on the zinc alloy die casting in conjunction with the maximum injection pressure (hydraulic pressure) that the machine is able to provide. When evaluating the performance of the die casting machine, it is essential to take into account this index, as it represents a significant point of measurement. This is an essential precondition to meet. If we make the conservative assumption that each of the injection cylinders is the same as the others, then it stands to reason that the injection force will be greater if the hydraulic pressure that the oil pump of the custom die casting is able to provide is increased.

P stands for the specific pressure of injection (PA), P stands for the injection force (n), and D stands for the diameter of the injection chamber (CM) in this equation.

Maximum metal pouring volume
This speed is what the industry considers to be the maximum air injection speed at this point in time. There is a close relationship between these two concepts, despite the fact that the rate at which the metal is filled is not the same as the rate at which this occurs. This index is an important piece of data to take into consideration whenever one is conducting an analysis of the injection performance of a die casting machine.

This is a significant index in terms of measuring the machining and assembly accuracy of the die casting machine. In some die casting machines, the nominal clamping force is not particularly low; however, when the machine is put into production, the force is frequently unable to lock the die and release the fly water. This occurs because the nominal clamping force is lower than the actual clamping force. This is due to the fact that the actual clamping force is greater than the nominal clamping force that is specified. The threshold of tolerance for this index has been exceeded, which is the reason why this has taken place as a result of what has transpired.

When looking for a die casting machine, you need to make sure that you give the question of safety the amount of attention that is commensurate with the gravity of the situation and that it warrants.

This is done to guarantee that the machine is utilizing electricity in a secure manner. To provide further clarity, the withstand test requires the subject to be exposed to a voltage of 500 volts for an entire minute.2At the very most, the insulation resistance can be higher than l m, but it must be lower. The maximum value that is allowed is denoted by the notation l m.3The grounding resistance must have a value that is less than or equal to 0.1 ohms.

Control mode
The relay control mode is the most common and well-known type of control. PLCs are the tool of choice for most control applications. Or programmable controller control, which is a significant improvement over relay control but nonetheless still necessitates a significant amount of expertise to operate. This is because programmable controller control is a more complex system.

Kommentare